Made of 6061 billet aluminum, the SX300 G-Sensor box mod is a 50 watt device containing a Yihi SX300 chip. The chip contains a gravity sensor for adjusting power from 7 watts to 50 watts. The 510 pin is adjustable for flush mounting atomizers. The device also has a usb port for charging your battery.
The Yihi SX chips are regarded as excellent among the vape community. Put one of those chips in a Hana style box and you have yourself a great box mod such as this one right here.
Details:
- Chip: Yihi SX300
- Recessed 510 connection
- Adjustable 510 center pin
- Gravity sensor adjust power automatically: 7-50W in .1W increments
- The body is made of 6061 billet aluminum
- Output voltage/current: 4-11V/10A
- Input voltage/current: 3.2-4.3V (3.7V typical)/1.5-15A (8.8A typical)
- Atomizer resistance: 0.3-3.5Ohm (1.5Ohm typical)
- Efficiency: 92%
- Screen on current: 25mA
- Quiescent current: 1mA
- Power down current: 300uA
- Screen size: 0.66″ OLED
- Charge current required: 500mA
SX300 G-Sensor Box Mod
$52.44
Get It Here
Does anyone know what is the lowest resistance this device can run? I build around .2 and would like to use that in here
The SX300 is slightly above that, it’s advertised as compatability with 0.3 – 3.5 ohms.