The KVP 180W looks a little familiar doesn’t it? It looks to be using a very similar case to the Sigelei 150W. The KVP 180W uses dual 18650 batteries which are easily accessible via the magnetic back panel. It has a wattage range of 10 watts to 180 watts with a minimum resistance of 0.3ohms. It has all the usual protections as well as high temperature protection for the board (not a temperature control device). And for those that prefer it, the 510 pin is spring loaded.

Details:

• 5 times click to turn ON/OFF
• 10s vaping time limit
• Variable wattage: 10-180W
• Atomizer resistance range: 0.3-3ohm
• Battery voltage required: 7.4-9V
• Low voltage protection (lower than 6.4V)
• Low resistance protection (lower than 0.3ohm)
• High voltage warning
• Output short circuit protection
• High temperature warning (higher than 45’C)
• Reverse polarity protection
• Quiescent current: < 250uA
• 510 connection with spring loaded center pin
• Magnet back cover

KVP 180W Box Mod

$66.84