The Kanger K-Simar is the newest tube mod from KangerTech. It is adjustable from 7 to 20 watts in 0.1 watt increments. It has a spring loaded 510 pin so no problems with atomizers sitting flush. For you sub-ohmers out there the Kanger K-Simar will fire down to 0.5ohms. This device has a gravity sensor in it so that means you’ll be adjusting your watts by tilting the device left or right.

The Kanger K-Simar gives off an eVic vibe with its tinted section surrounding the device where the screen is, which is not a bad thing. It looks nice and has enough power for most vapers out there.

Details:

Variable wattage – can be adjustable from 7.0W to 20.0W (in 0.1W increments)
510 threading connector (floating 510 center pin)
Brass battery contacts
Fixed positive contact and spring-loaded negative contact
Quickly click the button for 5 times to access the setting mode
OLED display showing resistance of the atomizer, working voltage/wattage, battery voltage and capacity
Time-limited protection: 10 seconds
Low voltage, over voltage, low load (resistance) and short circuit warning
Gravity sensor shake control
Powered by 1*18650 (battery sold separately)
Resistance value should be over 0.5ohm (1.5-2.5ohm recommended)
Working temperature: 5’C-45’C