The Tesla Nano is a great looking 100 watt box mod from Tesla, who have been putting out quite a few devices lately. This device also does temperature control with both nickel and titanium. In temperature mode it will fire down to a minimum resistance of 0.05ohms and a minimum of 0.1ohms in wattage mode. I’m undecided about the plus and minus buttons being on top but it’s certainly different than what we usually see. Inside are 2 li-po batteries with a total of 4500mah with a USb port on the bottom for charging.

Details:

Variable wattage: can be adjustable from 7W-100W (in 0.5W increment)
Temperature control: can be adjustable from 200’F-600’F/100’C-300’C (in 10’F/5’C increment)
OLED screen display the output wattage, battery level, resistance and temperature
Pressing the fire button 5 times continuously will turn to locked mode, when the mod is locked, the screen will display “LOCKED CLICK 5X” if pressing any button once, then press 5 times of the fire button will unlock the mod
In locked mode, press both up and down buttons at the same time to enter “HOLD TO CHANGE TEMP” mode, then press up and down button to adjust temperature
Output voltage: 8V
Output current: 24.5A
Resistance range:
– Normal coil: 0.15-3.5ohm (7-100W) / 0.1-0.14ohm (7-60W)
– Ti/Ni200 coil: 0.05-1ohm
510 threading connection (spring-loaded center screw)
Side mounted firing button, without locking ring
25 air holes on the bottom
Micro-USB charging port