Skip to main content

Tesla Metal 120W Box Mod – $74.98

By January 22, 2015January 25th, 2015Box Mods, Regulated Mods, Variable Wattage
Tesla Metal 120W Box Mod

It looks like we have another Chinese company jumping on the high wattage band wagon. This one is the Tesla Metal 120W box mod. It has a 0.9″ OLED display that shows resistance, watts, volts, and battery level. When you pop off the back cover, which is held on with magnets (yay!), you’ll find a spot for two 18650 batteries. If you’re vaping at 120W you’re not going to get a whole lot of vaping time on one charge but if you vape at lower watts then you’re most likely going to get all day out of one charge, if not more.

At the top of the device is a pretty hefty looking 510 which is adjustable should you need it. I like the up and down buttons on this one. They’re just about as big as the fire button and are shaped like a “+” and “-” which looks pretty cool. The bottom of the device has plenty of vent holes and on the side you’ll find the obligatory dragon that China likes to put on everything.

Details:

  • 0.9 inch OLED display screen shows battery level, voltage, resistance, wattage
  • Variable wattage: Can be adjustable from 7-120W (in 1W increment)
  • 510 threading connection
  • Chromed copper center pin (adjustable)
  • Powered by 2*18650 batteries (batteries sold separately)
  • Max. output voltage: 11V
  • Max. output current: 24A
  • Min. support resistance: 0.2ohm
  • Range of resistance: 0.2-3.5ohm
  • Over puffing protection (10 seconds)
  • Low voltage protection, reverse polarity protection, short circuit protection
  • With screen inversion function, convenient for being used to left hand people (press the “+” and “-” buttons at the same time)
  • Magnet back cover

Tesla Metal 120W Box Mod

$74.98

Get It Here

 

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.