Almost all of the issues with the original iStick have been taken care of in the new Eleaf iStick 30W mod. It has the same screen, same shell, it’s just as small and the non-removable battery is just as big, but this updated version now includes a floating 510 connection pin which is something that should have been included on the original. Also the new Eleaf iStick 30W is now capable of sub-ohming all the way down to 0.4 ohms!

Another thing that bugged the heck out of folks is that you could not lock the up and down buttons. So when you put it in your pocket it would sometimes auto adjust itself on you, but that has been taken care of too! Even the overhang you got from your attached atomizers has been fixed as well. With that said, if you’re looking for plenty of power in a tiny package that can sub-ohm too, then you’ll love the Eleaf iStick 30W box mod.

Details:

Click the square button for 5 times to turn on/off the mod
Click the square button for 3 times to switch the VV/VW mode when the battery is turned on
Variable wattage – can be adjustable from 5.0W to 30.0W (in .1W increments)
Variable voltage – can be adjustable from 2.0V to 8.0V (in .1V increments)
510 threading connection
Micro-USB charging port
0.8″ OLED screen displays battery condition, resistance, wattage and voltage
Over 10s protection
Atomizer short-circuit protection
Low-voltage protection (lower than 3.3V)
Unlock the low-voltage protection (above 3.7V)
Low power alert (lower than 10%)
Rated resistance range: 0.4-5ohm