Skip to main content

KVP 180W Box Mod – $66.84

KVP 180W Box Mod

The KVP 180W looks a little familiar doesn’t it? It looks to be using a very similar case to the Sigelei 150W. The KVP 180W uses dual 18650 batteries which are easily accessible via the magnetic back panel. It has a wattage range of 10 watts to 180 watts with a minimum resistance of 0.3ohms. It has all the usual protections as well as high temperature protection for the board (not a temperature control device). And for those that prefer it, the 510 pin is spring loaded.


  • 5 times click to turn ON/OFF
  • 10s vaping time limit
  • Variable wattage: 10-180W
  • Atomizer resistance range: 0.3-3ohm
  • Battery voltage required: 7.4-9V
  • Low voltage protection (lower than 6.4V)
  • Low resistance protection (lower than 0.3ohm)
  • High voltage warning
  • Output short circuit protection
  • High temperature warning (higher than 45’C)
  • Reverse polarity protection
  • Quiescent current: < 250uA
  • 510 connection with spring loaded center pin
  • Magnet back cover

KVP 180W Box Mod


Get It Here


Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.